EDAG Testing Cosmos
EDAG Testing offers a comprehensive range of testing and validation services throughout the entire product development process. With coverage across all relevant testing areas, we combine in-depth expertise with state-of-the-art test equipment. Our experts support your product at every stage of development.
Precision and Expertise
in Every Test
The EDAG Testing portfolio combines decades of engineering expertise with state-of-the-art testing technology. Our accredited test laboratories cover the full spectrum of vehicle and component validation.
EDAG Testing stands for reliable results, short lead times, and transparent communication throughout the entire testing process. As an independent testing service provider, we offer manufacturer-independent testing services.
Testing Categories
Explore the key areas of our testing and validation services. Each area is backed by our experts and state-of-the-art testing technology.
Acoustic Testing
EDAG experts analyze, simulate, and optimize noise and vibration characteristics. The focus is not only on reducing unwanted noise, but also on developing acoustic solutions for vehicle sound quality — for example, AVAS systems for electric vehicles.
- NVH analysis and troubleshooting
- Unwanted noise analysis and design optimization
- Room acoustics simulation and design
- Sound design and acoustic quality assurance
Electromagnetic Compatibility
Electromagnetic interference can affect the safety and reliability of technical systems. Our EMC tests verify that components operate reliably and comply with the applicable limits for electromagnetic emissions and immunity.
- RE – Radiated emissions up to 40 GHz
- RI – Radiated immunity testing up to 18 GHz, 631 V/m at 1 m
- Preparation and support of complete EMC test plans
Emissions Testing
Emissions testing verifies that systems and products comply with applicable environmental requirements and helps minimize their environmental impact.
- Gas chromatography–mass spectrometry (GC-MS) with thermal desorption and headspace analysis
- High-performance liquid chromatography (HPLC) and HPLC-MS
- Fogging tests using gravimetric and reflectometric methods
- SHED chambers for emissions testing under controlled conditions
- Sensory testing for odor evaluation and surface quality assessment
Electrical and Electronic Testing
From cables and connectors to on-board chargers and DC/DC converters, our testing covers electrical, mechanical, climatic, and chemical requirements. Tests are performed in accordance with established standards and can be supplemented with individually configurable test sequences.
- Electrical endurance and environmental testing
- Modular test benches for component and functional testing
- Validation of low-voltage and high-voltage components under real-world conditions
Functional Validation
HMI components such as control elements, switches, and touch displays must operate reliably over millions of operating cycles. EDAG Testing evaluates their static and dynamic behavior using realistic operating scenarios under controlled laboratory conditions.
- 10 robots for functional endurance testing
- Functional test benches under climatic conditions
- Continuous recording of measurement data
Component Testing
Individual components must meet their specifications under defined conditions. We perform testing in accordance with customer specifications using automated endurance test benches — ensuring maximum efficiency and reproducible results.
- Customized test concepts and custom-built test benches
- Measurement and test automation
- Automated endurance testing and simulation of environmental conditions
Materials Testing
Materials must withstand extreme conditions. Our materials testing analyzes their mechanical, chemical, and thermal properties — from plastics and metals to composite materials.
- Determination of chemical properties
- Material card generation
- Surface and coating/paint testing
- Flammability testing
Mechanical and Durability Testing
Vehicles, machines, and systems are continuously exposed to loads. EDAG Testing simulates these loads under realistic conditions to identify weaknesses at an early stage, prevent failures, and systematically increase the service life of products.
- Vibration analysis and operational load measurements on body-in-white structures
- Tensile and compression testing of structural components
- Static and dynamic component testing
Safety Testing
Our safety tests include pedestrian and occupant protection, airbag testing, and force measurements on safety-relevant components.
- Pedestrian and occupant protection tests
- Airbag testing
Environmental Simulation
Do your components need to withstand extreme temperatures, humidity, salt spray, or vibration? Our environmental simulation services reproduce real operating conditions in the laboratory — faster and with greater control than field testing, while ensuring complete documentation.
- Temperature and climatic testing
- Vibration, shock, and mechanical testing
- Electrical testing
- Endurance testing
Driving Simulator
With a state-of-the-art simulation environment and dynamic driving simulators, virtual test drives can be conducted under realistic conditions. Vehicle dynamics, ride comfort, and handling are digitally simulated, evaluated, and optimized. This enables complex maneuvers to be tested precisely and repeatably — without physical prototypes, weather-related risks, or proving-ground logistics.
- Virtual prototype validation
- Testing of handling, steering, ride comfort, and NVH performance (noise, vibration, and harshness)
- Testing of automated and assisted driving functions, functional safety, HMI, and lighting
- Specialized test sessions for tire testing, motorsport, driver studies, and seat evaluation
ADAS Testing
We test advanced driver assistance systems under realistic conditions using modern driving robots, self-propelled target platforms such as Humanetics UFO and 4a Freeboard Small, and inertial measurement systems such as GeneSys ADMA. The testing process is supported by a comprehensive DEWETRON data acquisition system.
- Car-to-car tests
- Vulnerable road user tests
- Lane support system tests
- Blind spot detection tests
- Driver monitoring system tests
- Speed assistance system tests
- Vehicle testing abroad, including proving-ground and on-road testing
- Homologation tests
Battery Cell Testing
From individual battery cells through to complete battery systems, and from fast-charging tests to corrosion testing, EDAG Testing offers a broad range of battery testing services. With state-of-the-art equipment and extensive high-voltage expertise, battery systems are validated and verified in line with industry-specific requirements.
- Complete validation at cell, module, and system level
- 3 MW connected power capacity for large battery systems
- IP, EMC, corrosion, and climatic testing
- More than 40 HV-qualified testing and automation experts
- Accredited in accordance with DIN EN ISO/IEC 17025:2018
Lighting System Testing
EDAG Testing validates lighting systems using precise photometric and spectral measurements in its lighting laboratory. The focus is on the objective assessment of function, homogeneity, and lighting performance as a basis for development and validation.
- Goniophotometric far-field measurements with measurement distances of up to 25 m
- Luminance measurements for assessing homogeneity and visual quality
- Spectral measurements of light sources and lighting components
- Benchmark measurements on vehicles, including virtual validation
Complete Vehicle Validation
We support projects from product definition through to final release for series production. We analyze, evaluate, and optimize everything from individual components to complex vehicle systems. Our expertise covers passenger cars, commercial vehicles, construction machinery, electric vehicles, defence technology, and new urban mobility concepts.
- Function validation of vehicle attributes
- Durability testing of the complete vehicle
- Thermal validation of the complete vehicle
- Driving performance, fuel consumption and weight managmenet
EDAG Innovations
EDAG develops innovative solutions for modern vehicle and energy technologies — ranging from testing and temperature control systems to mobile hydrogen supply.
- EDAG Functional Test Unit – test system for functional testing
- EDcool::CO₂ EDAG Process Temperature Control – CO₂-based process temperature control
- EDmobile::H₂ EDAG – mobile H₂ refueling station for hydrogen suppl
Defence
Our testing expertise covers a wide range of industries. For the defence sector, we offer specialised testing services in accordance with AECTP, MIL, and DO standards — designed to meet the highest reliability requirements.
- Development-phase testing in accordance with AECTP, MIL, and DO standards
- Qualification testing for safety-critical systems
- Reliability analyses and service life predictions
Questions About Our Testing Portfolio?
Let’s talk about your specific testing requirements.
Get in Touch →